Wisconsin Oven is pleased to announce the shipment of one (1) gas-fired chain conveyor oven to a manufacturer in the automotive industry. This oven will be used for tempering automotive transmission shafts. The tempering oven has a maximum temperature rating of 392°F and chamber dimensions of 4’ W x 27’ L x 2’6 H. The oven is designed with three (3) heating zones, to meet a production rate of 450 parts per hour. The recirculation system provides 50,250 total CFM and utilizes top-down airflow to optimize airflow efficiencies and temperature uniformity. The conveyor system is a continuous chain style that

Wisconsin Oven is pleased to announce the shipment of one (1) carousel oven to a leading manufacturer in the energy industry. The oven will be used for curing epoxy in electrical transmission components. These carousel ovens are available in any heat type and with a variety of custom configurations. There is also a wide range of load weight capacities. Wisconsin Oven also provides a NEMA 12 control panel, fully wired and tested. This oven has a maximum temperature of 300°F, with a top-down airflow. It boasts a 3,400 CFM, 72 kW heating system that evenly heats parts to exacting specifications

Wisconsin Oven is pleased to announce the shipment of one (1) Natural Gas Fired Top Load Oven to a leading manufacturer in the energy industry. The oven will be used for drying moisture from large electrical components. The drying oven has a maximum temperature rating of 300°F and chamber dimensions of 19’ W x 10’ L x 14’ H. The oven shell is designed with Wisconsin Oven’s patented, high efficiency Expandable Surface™ design. The pneumatically operated vertical hinged door allows for top loading and unloading of parts. The gas-fired oven is heated by an industrial air heat burner rated at

Wisconsin Oven is pleased to announce the shipment of one Natural Gas Fired Conveyor Oven to the Transportation Industry. Designed to cure contoured plastic parts, this oven has a maximum temperature of 500°F and its normal operating temperature is 350°F. The chamber dimensions are custom to this oven at 7’0” W x 21’10” L x 1’0” H. The insulated wall panels are constructed of a 20-gauge aluminized steel interior and painted carbon steel exterior. The oven’s shell features our patented high-efficiency panel seams that provide 25% better efficiency than conventional designs. This system’s heating equipment includes an industrial air heat

Wisconsin Oven is pleased to announce the shipment of one (1) Electrically Heated Small Batch Series Oven to the electronics industry. This oven will be used for curing a coating on aluminum parts at 65°C to 70°C. This oven has a maximum temperature of 500°F and its normal operating temperature is 185°F. The chamber dimensions are 4’ W x 3’ L x 4’ H. The system’s body will be constructed with our patented efficiency panel seams which provide 25% better insulating efficiency than conventional designs. This system features a side-hinged horizontal swing door on one end and a door limit

Wisconsin Oven is pleased to announce the shipment of one (1) Electrically Heated Enhanced Duty Walk-In Oven to the Aerospace Industry. This oven will be used for powder coatings and curing applications. The maximum temperature for this oven is 500°F and the normal temperature is 450°F. The effective work zone dimensions are 4’ W x 6’ H x 5’ L. The system’s floor will consist of 20-gauge 304 stainless steel reinforced integral insulation (2” thick) and 12-gauge 304 stainless steel wheel guides. This system features bi-parting, side-hinged, horizontal swing doors at one (1) end, and customer-specified paint color. “This Electrically

Wisconsin Oven is pleased to announce the shipment of one (1) Electrically Heated Standard Horizontal Quench System. This oven will be used for the solution treatment and aging of aluminum. The maximum temperature for this oven is 1,100°F and the normal temperature is 985°F. The overall dimensions are 14’6”W x 17’6”H x 27’0”L, while the interior chamber dimensions are 7’0”W x 3’6”H x 3’0”L. The system’s walls and ceiling feature “CAN” style construction and include 6 inches of insulation. This system features a maximum 7-second quench delay. Click on this link to watch a video of this system in operation

Wisconsin Oven is pleased to announce the shipment of one (1) Electrically Heated Enhanced Walk-In Series Oven. This oven will be used for sintering parts for plastics applications. The maximum temperature for this oven is 800°F and the normal temperature is 700°F. The overall dimensions are 9’9”W x 7’4”L x 13’10”H, while the chamber dimensions are 6’0”W x 6’0”L x 7’0”H. The oven’s body is constructed of tongue and groove panel assemblies featuring our patented high efficiency panel seams. “This sintering oven is similar to another we provided to this customer in 2013. There are some items that were changed